Groin: DENVER
LG-460, 560 X 500, 750, 1000, 1500, 2000
Main Features:
FEATURES
Standard accessories
Optional accessories
Unit: mm / inch
Model | LG-460 / 560 | |||||
500 | 750 | 1000 | 1500 | 2000 | ||
Capacity | Swing over Bed | 460 (18.11") / 560 (22.05") | ||||
Swing over cross slide | 280 (11.02") / 380 (14.96") | |||||
Distance between centers | 500 (19.69") | 750 (29.53") | 1000 (39.37") | 1500 (59.06") | 2000 (78.74") | |
Bed | Swing over gap | 680 (26.77") / 780 (30.71") | ||||
Width of Bed | 317 (12.5") | |||||
Width of gap (spindle end face) | 210 (8.27") | |||||
Length of Bed | 1490 (58.66") | 1740 (68.5") | 1990 (78.35") | 2490(98.03") | 2990(117.72") | |
Headstock | Spindle bore diameter | A2-6 -ø70mm (2.76") / D1-6 -ø62mm (2.44â€) | ||||
Numbered of spindle speeds | 12 steps | |||||
Range of spindle speeds | 25-1800 rpm | |||||
Spindle nose | A2-6 / D1-6 | |||||
Carriage | Width of Carriage | 485 (19.09") | ||||
Cross slide travel | 250 (9.84") | |||||
Top slide travel | 125 (4.92") | |||||
Tool shank | 20x20 (0.79"x0.79") | |||||
Tailstock | Diameter of barrel | ø56(2.2") | ||||
Travel of barrel | 150(5.9") | |||||
Taper of barrel | M.T. 4 | |||||
Feeds | Feed rod diameter | 22(0.87") | ||||
Range of longitudinal Feeds | 0.04 - 1.0 mm / rev | |||||
Range of cross Feeds | 0.05-1.25 mm / rev | |||||
Motor | Main spindle Motor | 5 HP (3.75kw) OP: 7.5 HP (5.625kw) | ||||
Coolant pump Motor | 1/8 HP (0.1kw) |