DL-660 / 760 / 840 X 1000, 1500, 2000, 3000, 4000
Feature
 | Model | DL-660 / 760 / 840 | |
1000 | 1500 | ||
Capacity | Swing over Bed | 660 (26") / 760 (29.92") / 840 (33") | |
Swing over cross slide | 400 (15.75") / 500 (19.69") / 580 (22.84") | ||
Distance between centers | 1000 (39.37") | 1500 (59.06") | |
Width of Bed | 420 (16.54") | ||
Length of Bed | 2640 (103.94") | 3140 (123.62") | |
Bed way of Carriage | 1 mountain way + 1 box way | ||
Bed way of cross slide | Dovetail slide way | ||
Headstock | Spindle bore | 105 (4.13") | |
Spindle nose | A2-8 | ||
Range of spindle speed | 20-1300rpm | ||
No. of spindle speed | 4 steps | ||
Travel | X-axis travel | 330(13â€) / 380 (14.96â€) / 420 (16.54â€) | |
Z-axis travel | 1000 (39.37") | 1500 (59.06") | |
* It changed by different turretã€chuck or Tailstock. | |||
X-axis ball screw diameter | 25 mm, pitch 5 mm | ||
Z-axis ball screw diameter | 50 mm, pitch 10 mm | ||
Feed | X-axis rapid feed | 5000 mm/min (196.85" /min) | |
Z-axis rapid feed | Â 7500 mm/min (295.28" /min) | ||
X-axis cutting feed rate | 0-3000 mm/min (118.11" /min) | ||
Z-axis cutting feed rate | 0-5000 mm/min (196.85" /min) | ||
TURRET | Tool station | manual 4 way | |
Size of external turning | 25x25 (0.98" x0.98") | ||
Boring bar diameter | 40 (1.57") | ||
Tailstock | Quill diameter | 105 (4.13") | |
Quill travel | 180 (7.09") | ||
Taper of center | MT 6 | ||
Motor | Spindle Motor | 11 kw (15 HP) | |
X-Axis servo Motor | 1.8 kw (2.4 HP) | ||
Z-Axis servo Motor | 1.8 kw (2.4 HP) | ||
Hydraulic pump Motor | 1.5 kw (2 HP) | ||
Coolant pump | 0.75 kw (1HP) |