HL-960, 1120, 1220~1620 x 1500, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000
Feature
It is suitable for turning and cutting of large work piece and steel rod materials for heavy industries like oil pipe network, aerospace and heavy-duty shaft processing.
Standard accessories
Optional accessories
Unit: mm / inch
Model / Width of Bed 24" (610) | HL-960, HL-1120, HL-1220-1620 | ||||||||
Model | 1500 | 2000 | 3000 | ||||||
Capacity | Swing over bed | 960 (37 .8") 1120 (44") 1220 (48") ~ 1620 (63.8") | |||||||
Swing over cross slide | 650 (25 .6") 810 (32") 910 (35.83") ~ 1310 (51.6") | ||||||||
Swing over gap | 1390 (54.72") 1550 (61.02") 1640 (64.96") ~ 2050 (80.7") | ||||||||
Distance between centers | 1500 (59") | 2000 (80") | 3000 (120") | ||||||
Bed | Height from floor to the spindle center | HL-960 | 1165 (45.87") | ||||||
HL-1120 | 1245 (49.02") | ||||||||
Width of Bed | 610 (24") | ||||||||
Width of gap | 400 (15.75") | ||||||||
Length of Bed | 3450 (135.83") | 3950 (155.51") | 4950 (194.88") | ||||||
Headstock | Spindle bore diameter | ø152 (6") | OP: 230 (9") | OP:255(10") | OP:305(12") | OP:380(15") | |||
Spindle nose | A2-11/ OP: A2-15 | A2-15 / OP: A2-20 | A2-15 / OP: A2-20 | A2-20 | A2-20 | ||||
Number of spindle speeds | 16 steps | 12 steps | 12 steps | 12 steps | 12 steps | ||||
Range of spindle speeds | 4-420 rpm | 8-291 rpm | 8-291 rpm | 7-264rpm | 7-264 rpm | ||||
Carriage | Width of Carriage | 800 (31.5") | |||||||
Cross slide travel | 530 (20.87”) | ||||||||
Compound rest travel | 370 (14.57") | ||||||||
Max. size cutting size | 32 x 32 (1.26" x 1.26") | ||||||||
Tailstock | Diameter of barrel | HL-Ø125 (4.92") OP:Ø150 (5.91") | |||||||
Travel of barrel | 300(11.8") | ||||||||
Taper of barrel | MT 6 | ||||||||
Feeds | Feed rod diameter | 32 (1.26") | |||||||
Range of longitudinal Feeds | 0.072-8.680 mm / rev | ||||||||
Range of cross Feeds | 0.036-4.34 mm / rev | ||||||||
Motor | Main spindle Motor | 20HP (15KW) for HF-2000~5000 | |||||||
Coolant pump Motor (Optional) | 1/8HP (0.1kw) | ||||||||
Rapid Pump Motor | 1HP (0.75kw) |